S.I.C.E.S. S.R.L.
HS 315
Hybrid system controller for 48Vdc generators
typically used in Telecom applications
12 x Digital Inputs
12 x Digital outputs
3 x Analogue inputs
1 x Analogue output
AND/OR Logic control
Event history log
16 x Calendars and 4 timers
USB port
RS232
RS485
Ethernet
HS315 version only
GPRS/GPS
Link version only
5G ready
Link version only
TIER4 final Stage V
Description
HS315 aims to minimise generator run time and optimize both fuel consumption and running hours.
This hybrid controller features whole site voltages and currents monitoring with the ability to communicate with smart batteries.
HS315 has been designed to control DC generator and is able to monitor load and battery levels, as well as manage the automatic stop/start of the genset.
Specific functions have been included to ensure a comprehensive control and protection of the genset, the battery, the charging system and of an auxiliary renewable power source (if any).
The standing control of the battery, and its charging process, ensures the battery long lasting, reducing fuel consumption and service/maintenance on the engine.
The in-built BMS provides information like charge level and remaining supply time estimation, allowing manual control of the system as well. Configurable specific I/O are provided assuring the specific requirements of the application.
HS315 is compatible with both electronic CANBUS J1939 and non-electronic engines.
All the parameters can be set directly by the controller’s keyboard or, alternatively using the free software tool (BoardPRG3), available from SICES’ website.
Historical events and DTC logs can be accessed from the front panel and read on the display.
HS315 supports several communication interfaces for local or remote control.
HS315Link 5G has built in global 5G modem with global 2G fallback capability, which also embeds the GNSS localization system (GPS/GLONASS/BD) to provide a high availability solution, that offers industry-leading accuracy and performance. Useful where asset tracking and monitoring are required.
Rear view connections and dimensions
Main features
- Automatic start/stop of the genset, according to storage battery voltage and charge level.
- Full “Battery Management System” (BMS) built into, for maximum battery life and performance.
- Voltage and current compensation according to battery temperature.
- Storage battery level visualization.
- Speed control and/or excitation control of the engine.
- Management of an auxiliary renewable power source (if any).
- Dedicated configurable inputs for DC voltages and currents.
- Real time clock and event log.
- Freely configurable timers.
- Genset fuel consumption and maintenance reduction.
- Several communication ports available.
EMBEDDED FUNCTIONS
- Automatic/manual start with configurable start/stop timers.
- Configurable inputs/outputs.
- Storage battery visualizations:
• temperature,
• residual charge,
• depth of discharge (DOD). - Automatic start/stop based on storage battery status.
- Engine diagnostic code.
- Periodical test.
- Real Time Clock with internal rechargeable Lithium battery.
- Fuel pump management.
- 126 Events log.
- 32 Additional events log for the charge/discharge of the storage battery.
- Pre-glow and coolant heater management.
- Remote start and stop.
- Hours counter for the maintenance schedule.
- Daily counter with embedded calendar for the maintenance.
- Embedded alarm horn.
- Engine speed measurement by pick-up, frequency or W.
- Configurable by PC or controller’s keyboard.
- Remote firmware update.
- SMS communication.
- NTP, DHCP, DNS e SNMP Support.
Multilingual device
EN, IT.
- Supply voltage: 7…32 Vdc.
- Power consumption: typical less than 2W (auto mode, stand-by, LCD lamp saving active).
Operating frequency 50Hz or 60Hz (AC reading only). - LCD with backlight.
- Operating temperature: -25 °C to 60 °C.
- Burn in @ 50°C for 48h with test report for each controller.
- Protection degree: IP65 (gasket included).
- Weight: 750gr.
- Overall dimension: 244 (W) x 178 (H) x 50 (D) mm.
- Panel cut-out: 218 (W) x 159 (H) mm.
- Graphic display dimensions: 70x38mm - 128x64 pixel.
- EMC: conform to EN61326-1.
- Safety: built in conformity to EN61010-1.
Eng.
Ita.
Esp.
Por.
Fra.
Ger.
Chi.